What Should Be Paid Attention To When Using The Torque Multiplier

The use of extension rods is dangerous,and the use of a torque multiplier can reduce the length of the extension rods and the user's output by a magnification of 4,25,or 28 times.

Limitation of operating space The use of longer extension rods may be unsuitable for extension rods due to space limitations.

Accurate use of torque wrench multiplier operation will be smoother,smoother and more accurate torque can be obtained.In the process of bolt tightening,physical expenditure can be reduced.It is quite difficult to tighten and remove large-diameter bolts and nuts in power plant power maintenance and production maintenance installation sites in various industrial industries,especially in environments where operators are difficult to construct (such as the small space around the equipment,it is impossible to use afterburners and various special Wrench,etc.),this contradiction becomes more prominent.

Notes on the use of torque multiplier:

(1) Pay attention to the torque value of the matched torque wrench,and do not overload it.

(2) Maintain the coaxial alignment of the drive head of the torque wrench,the multiplier and the locked object as much as possible.

(3) Try to maintain reliable plane contact between the reaction force arm and the resisting object.

(4) Try to keep the reaction force at a right angle to the reaction force arm.

(5) The reaction force point should be as far away from the multiplier as possible and within the safety triangle.

(6) For safety reasons,it is not allowed to use double arms or balanced reaction arms.

(7) To remove the multiplier,first remove the torque wrench and toggle the anti-rebound device,avoid knocking.