How To Use Torque Wrench

May 02, 2020

Let's talk about the technical operation of torque wrenches.Torque wrenches are used in this way:

1.When using a torque wrench,it is most appropriate when you hear a "snapping" sound.

2.In the use of torque wrenches,first of all,the moderate range should be selected according to the requirements of the measuring parts.The measured torque value should not be less than 20% of the torque range in use.Reinforced,the small range of torque can not be used over-range.

3.When using a torque wrench,first connect the force pawl to auxiliary accessories (such as sleeves,various types of mouths) to ensure that the connection is no problem.Before strengthening the torque,set the force value that needs to be strengthened,and Lock the locking device,then adjust the direction switch to the direction of force.

4.When measuring,the hand must grasp the effective range of the handle,and slowly increase the force perpendicular to the direction of the tube until you hear the sound after reaching the set value.During the application of force,follow the standard instrument operation According to the specification,the vertical deviation should not exceed 10 degrees.The horizontal deviation should not exceed 3 degrees.During the use,the operator should ensure that the vertical force does not exceed 15 degrees.

5.In order not to affect the measurement result due to the deviation of the horizontal and vertical directions,during the measurement,a vertical downward stable force value should be applied to the forcing grip end.

手动扭矩

You Might Also Like