Common knowledge of electric torque wrench hands

Mar 06, 2020

1.Before use,check whether all parts are normal.

2.Strictly abide by the provisions in the main parameters during use,and avoid ultra-high overload,otherwise when the lifting height or lifting tonnage exceeds the regulations,serious oil leakage will occur on the top of the cylinder.

3.If the amount of oil in the manual pump body is insufficient,it is necessary to add hydraulic oil that has been fully filtered to the pump to work.

4.Please refer to the instruction manual of the electric pump for the electric pump.

5.The center of gravity of the heavy objects should be selected moderately,the focus of the electric jack should be selected reasonably,the bottom should be flat,and the soft and hard conditions of the ground should be considered,whether the tough wood should be lined,and whether it is placed smoothly to avoid sinking or tilting under the load.

6.After the electric jack lifts the heavy object,the heavy object should be firmly supported by the support in time.It is forbidden to use the electric jack as a support.

7.In addition to the correct placement of ultra-high pressure jacks,multiple shunt valves should be used,and the load of each electric jack should be balanced.Pay attention to keeping the lifting speed synchronized.


You Might Also Like